Mark C. Pope Associates, Inc. > Replacement Parts > Lester Automatic Battery Chargers > SCR Chargers > 36 Volt, 30 Amp Lester SCR Automatic Charger, X Series (for wet cell batteries)

36 Volt, 30 Amp Lester SCR Automatic Charger, X Series (for wet cell batteries)

36 Volt, 30 Amp Lester SCR Automatic Charger, X Series (for wet cell batteries)

Advanced, Feature-Rich Chargers

X-Series are advanced SCR industrial battery chargers that offer industry-leading features. They are ideal for use in both specialized applications, such as industrial vehicles, aerial work platforms, and floor care, and general-purpose charging applications.

Reliable and Durable

The X-Series product line continues the tradition of proven Lester Electrical reliability. The case is heavy gauge and powder coated. The efficient convection-cooled design offers optimal heat dissipation without the need for a cooling fan, which further enhances reliability. X-Series battery chargers are made in the USA and tested to UL and CSA standards.

Optimum Battery Capacity and Life

An advanced microprocessor controller is featured in X-Series battery chargers. Precise Lester Electrical charging and termination algorithms prevent both undercharging and overcharging, optimizing both daily battery capacity and overall battery life.

Storage/Refresh Mode

X-Series battery chargers are designed to remain connected to batteries with the AC power on when equipment is not in use. A charger will periodically provide a special refresh/conditioning charge to the batteries during storage to overcome battery self-discharge and reduce sulfation.

Manual Stop/Start

The manual stop/start button available on XSeries battery chargers can be used to manually stop a charge cycle before automatic termination occurs to safely disconnect the battery. This button can also be used to restart a charge cycle that you previously manually stopped.

Low Battery Voltage Start

Overly-discharged batteries are not an issue for XSeries battery chargers. A low voltage start button is available to manually start a charge cycle for a low-voltage battery (down to 1V).

Self Diagnostic

If an issue occurs with a battery charging system containing an X-Series battery charger, you can press the innovative self diagnostic button to determine if the charger is functioning properly, and if not, which component needs to be serviced.

Encapsulated Controller

The X-Series controller is completely encapsulated in a protective material. This protects the electronics from moisture/corrosion.

AC Input
Voltage 120VAC
Frequency 60Hz
Phase Single
Current 14.5 Amps
Protection AC Breaker
DC Output
Voltage 36V DC
Starting Current 30 Amps
Protection DC Fuse
Amp Hour Rating 170-350Ah

Details
Part Number 27050
Weight 40.00 lbs
 
Price: $427.50
Options
DC Plug Type
Quantity

Email Product Information

: *
: *
: *
Type the characters you see in the picture. (If you do not see any picture here, please enable images in your web browser options and refresh this page):